Model |
RG-AP130(W2) |
|
Model |
RG-AP130(W2) |
|
Radio |
Concurrent dual-band dual-radio |
|
Protocol |
802.11a/b/g/n, 802.11ac Wave 1, 802.11ac Wave 2 |
|
Operating Bands |
2.4GHz and 5GHz |
|
Antenna |
Built-in omnidirectional antenna |
|
Spatial Streams |
2 |
|
Modulation |
11b: DSS:[email protected]/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM |
|
Maximum Transmit Power |
≤100mW (20dBm, transmit power of the RF card only) |
|
Service Ports |
Front: |
|
Management Port |
1 console port (Micro USB) |
|
Lock |
Standard: Anti-theft screws and ordinary screws |
|
Color Plate Cover Options |
White, black, silver and gold |
|
LED Indicators |
1 LED status indicator |
|
IP Rating |
IP41 |
|
WLAN |
Maximum clients per AP |
Up to 32 |
BSSID capacity |
Up to 8 per radio |
|
SSID hiding |
Support |
|
Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID |
Support |
|
Remote Intelligent Perception Technology (RIPT) |
Support |
|
Intelligent identification of smart device |
Support |
|
Intelligent load balancing based on the number of users or traffic |
Support |
|
STA control |
SSID/radio-based |
|
Bandwidth control |
STA/SSID/AP-based speed control |
|
Security |
PSK, Web, and 802.1x authentication |
Support |
Data encryption |
WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits) |
|
QR code authentication |
Support |
|
SMS authentication |
Support |
|
PEAP authentication |
Support |
|
Data frame filtering |
Whitelist, static/dynamic blacklist |
|
User isolation |
Support |
|
Rogue AP detection and countermeasure |
Support |
|
Dynamic ACL assignment |
Support |
|
RADIUS |
Support |
|
CPU Protection Policy (CPP) |
Support |
|
Network Foundation Protection Policy (NFPP) |
Support |
|
Wireless Intrusion Detection System (WIDS) |
Support |
|
Remote probe |
Future release support |
|
Routing |
IPv4 address |
Static IP address or DHCP reservation |
Multicast |
Multicast to unicast conversion |
|
Location-based Service |
Wireless position tracking |
Support |
Management and Maintenance |
Network management |
SNMP v1/v2C/v3, Telnet, TFTP, FTP and web management |
Visualized wireless heat map analysis |
Support |
|
Real-time spectrum analysis |
Support |
|
Fault detection and alarm |
Support |
|
Statistics and logs |
Support |
|
FAT/FIT switching |
The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. |
|
Dimensions (W x D x H) (mm) |
116 × 86 × 42 |
|
Weight |
0.23kg |
|
Installation Mode |
Standard 86-type faceplate installation |
|
Power Supply |
PoE (802.3af), local DC power supply |
|
Power Consumption |
<8W |
|
Temperature |
Operating Temperature: -10°C to 45°C |
|
Storage Temperature: -40°C to 70°C |
||
Humidity |
Operating Humidity: 10% to 95% (non-condensing) |
|
Storage Humidity: 5% to 95% (non-condensing) |
RG-AP130-W2 Ruijie Wireless Wall-mounted
หมวดหมู่: Access point, Access Point Ruijie, Smart Solutions, Wall AP