| Model | RG-AP130(L) | |
| Radio | Concurrent dual-band dual-radio | |
| Protocol | 802.11a/b/g/n/ac | |
| Antenna | Built-in omnidirectional antenna (Base gain 3.5dBi) | |
| 2×2 MIMO | ||
| Spatial Streams | 2 | |
| Max Throughput | [email protected] | |
| 867Mbps@5GHz | ||
| 1.167Gbps per AP | ||
| Maximum Transmit Power | ≤100mW (20dBm, transmit power of the RF card only) | |
| Service Ports | Front: | |
| 4 10/100M Ethernet ports | ||
| Side: | ||
| 1 RJ-45 Voice/PoE pass-through port (RJ-11 combo) | ||
| Rear: | ||
| 1 10/100/1000M uplink port | ||
| 1 RJ-45 Voice/PoE pass-through port (RJ-11 combo) | ||
| Management Port | 1 console port (Micro USB) | |
| Lock | Standard: Anti-theft screws and ordinary screws | |
| Optional: Lock and key | ||
| Color Plate Cover Options | White, black, silver and gold | |
| LED Indicator | 1 LED status indicator (hidden) (configurable to switch off) | |
| IP Rating | IP41 | |
| WLAN | Maximum clients per AP | Up to 32 |
| BSSID Capacity | Up to 8 per radio | |
| Up to 16 per AP | ||
| SSID hiding | Support | |
| Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID | Support | |
| Remote Intelligent Perception Technology (RIPT) | Support | |
| Intelligent identification of smart device | Support | |
| Intelligent load balancing based on the number of users or traffic | Support | |
| STA control | SSID/radio-based | |
| Bandwidth control | STA/SSID/AP-based speed control | |
| Preference for 5 GHz (band select) | Support | |
| 802.11w | Support | |
| Dynamic Frequency Selection (DFS) | Support | |
| Security | PSK, Web, and 802.1x authentication | Support |
| Data encryption | WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits) | |
| QR code authentication | Support | |
| SMS authentication | Support | |
| PEAP authentication | Support | |
| Data frame filtering | Whitelist, static/dynamic blacklist | |
| User isolation | Support | |
| Rogue AP detection and countermeasure | Support | |
| Dynamic ACL assignment | Support | |
| RADIUS | Support | |
| CPU Protection Policy (CPP) | Support | |
| Network Foundation Protection Policy (NFPP) | Support | |
| Wireless Intrusion Detection System (WIDS) | Support | |
| Wireless Intrusion Prevention System (WIPS) | Support | |
| Remote probe | Future release support | |
| L2 Features | IGMP snooping | Support |
| VLAN features | Support | |
| Routing | IPv4 address | Static IP address or DHCP reservation |
| IPv6 transparent transmission | Support | |
| Multicast | Multicast to unicast conversion | |
| Location-based Service | Wireless position tracking | Support |
| Management and Maintenance | Network management | SNMP v1/v2C/v3, Telnet, TFTP, FTP and Web management |
| Visualized wireless heat map analysis | Support | |
| Real-time spectrum analysis | Support | |
| Fault detection and alarm | Support | |
| Statistics and logs | Support | |
| FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. | |
| The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. | ||
| Dimensions (W x D x H) (mm) | 116 × 86 × 42 | |
| Weight | 0.23kg | |
| Installation Mode | Standard 86-type faceplate installation | |
| Power Supply | PoE (802.3af) | |
| Power Consumption | <8W | |
| Temperature | Operating Temperature: -10°C to 45°C | |
| Storage Temperature: -40°C to 70°C | ||
| Humidity | Operating Humidity: 10% to 95% (non-condensing) | |
| Storage Humidity: 5% to 95% (non-condensing) | ||
